Used 1.5 1967 GMC/Chevy C20 ,C10 Projects - cars & trucks - by dealer -... for sale in East Falmouth, MA
$4,900
Vehicle Details
1967 Year | 100,000 mi. Mileage | $4,900 Price |
pickup Body Type | clean Title Status | manual Transmission |
gas Fuel Type |
Vehicle Description
I have rust free1967 GMC fenders ,doors ,etc. AND
minimal rust '67 Chevy CAB with paperwork .It's basically All the O.E.M. GM Sheet Metal ,VIN ,Title and Chassis to build an Excellent 1967 Small Window Short Bed C10 with ALL U.S.A. made original 1967 Parts ( Not chinese inferior metal ). My friend bought multiple Arizona ,California ,Oklahoma and other Trucks and sheet metal over the past few years and took them apart and he sold me these trucks and parts when he moved out west .This CAB is from Idaho - the cab has a title and the cab has only minor rust and a little rot in a few spots - 4 fenders are totally rust free as are 2 doors . I want $2,500 for the cab - - gas tank fenders and many other parts to build one truck .------and I also have many rust free Body parts . The second 1967 GMC Short Bed Step Side(" fender side" ) is a parts truck ( I SOLD the bed ) with a 250 6 cylinder (still turns over ),3 speed manual sm318 transmission on the tree and a factory leaf spring Dana 44 Rear End with 3:54 gears - it has some rust and Rot but had a Decent cab with some rust and rot . Currently I do not have the VIN tag to this parts truck because my same friend removed it for some reason but I do have the correct title to it .The Third truck complete rolling chassis is from a 1967 GMC C20 Long Bed with no rust and a running 1974 or 1973 350 4 bolt Engine and 4 Speed Transmission ( factory NP435CR ) and a factory limited slip 4:10 Dana 60 Rear End with factory leaf springs and 8 Lug wheels , it was a complete AZ truck but my same friend took the original mint cab and 8' bed off of it for his 4x4 dream project - I have the original nose from the truck and the VIN Tag from the cab . This '67 GMC C20 Long Bed Rolling Chassis and 350 4 speed drivetrain is $1,900 with the matching VIN Tag and Title ( or $1,500 without the Engine/ Transmission ) OR $3,800 with the '67 GMC Complete Parts Truck (pictured but sold bed ) There are many other parts too and 2 of the Doors and 4 fenders are rust free ,and one fender is nearly rust free but has a 4" rotted hole in the middle of a lower section that's repairable without getting into corners or flanges . and there is a rust free hood and a hood with just some underside light rust and many other parts. or call about the possibility of selling separate trucks or chassis.
- cab- doors- nose -chassis .please call noon to 11pm Five Zero Eight -274-7298 or might trade for 1973 -1987(91 on suburban or blazer ) K30,K35 ,K20 ,K10 or CUCV or 1965 ,1966 Pontiac Grand Prix or Catalina or 68-70 Charger project ,thank you
minimal rust '67 Chevy CAB with paperwork .It's basically All the O.E.M. GM Sheet Metal ,VIN ,Title and Chassis to build an Excellent 1967 Small Window Short Bed C10 with ALL U.S.A. made original 1967 Parts ( Not chinese inferior metal ). My friend bought multiple Arizona ,California ,Oklahoma and other Trucks and sheet metal over the past few years and took them apart and he sold me these trucks and parts when he moved out west .This CAB is from Idaho - the cab has a title and the cab has only minor rust and a little rot in a few spots - 4 fenders are totally rust free as are 2 doors . I want $2,500 for the cab - - gas tank fenders and many other parts to build one truck .------and I also have many rust free Body parts . The second 1967 GMC Short Bed Step Side(" fender side" ) is a parts truck ( I SOLD the bed ) with a 250 6 cylinder (still turns over ),3 speed manual sm318 transmission on the tree and a factory leaf spring Dana 44 Rear End with 3:54 gears - it has some rust and Rot but had a Decent cab with some rust and rot . Currently I do not have the VIN tag to this parts truck because my same friend removed it for some reason but I do have the correct title to it .The Third truck complete rolling chassis is from a 1967 GMC C20 Long Bed with no rust and a running 1974 or 1973 350 4 bolt Engine and 4 Speed Transmission ( factory NP435CR ) and a factory limited slip 4:10 Dana 60 Rear End with factory leaf springs and 8 Lug wheels , it was a complete AZ truck but my same friend took the original mint cab and 8' bed off of it for his 4x4 dream project - I have the original nose from the truck and the VIN Tag from the cab . This '67 GMC C20 Long Bed Rolling Chassis and 350 4 speed drivetrain is $1,900 with the matching VIN Tag and Title ( or $1,500 without the Engine/ Transmission ) OR $3,800 with the '67 GMC Complete Parts Truck (pictured but sold bed ) There are many other parts too and 2 of the Doors and 4 fenders are rust free ,and one fender is nearly rust free but has a 4" rotted hole in the middle of a lower section that's repairable without getting into corners or flanges . and there is a rust free hood and a hood with just some underside light rust and many other parts. or call about the possibility of selling separate trucks or chassis.
- cab- doors- nose -chassis .please call noon to 11pm Five Zero Eight -274-7298 or might trade for 1973 -1987(91 on suburban or blazer ) K30,K35 ,K20 ,K10 or CUCV or 1965 ,1966 Pontiac Grand Prix or Catalina or 68-70 Charger project ,thank you