Used 1931 Ford Sedan for sale in Wilmington, NC

1931 modified model "A" two door sedan. The best of both worlds. A 1931 model "A" body sitting on a custom made frame. The first 39 inches of the frame accommodates the 1940 ford flat head engine and transmission. Note the shifter in the floor. This unique arrangement is one of a kind. The next 60 inches of the frame accommodates the model "A" body. Study the pictures closely to get an appreciation of this unique build. The car is brand new from the tires to the top. Only 351 miles. The steel top was cut out of a Jeep Cherokee and welded in the model "A" body. Check out the dash. The top half is model "A" and the bottom is from a '32 Ford. In 1939 ford took the shifter out of the floor and put it on the steering column. However, ford left the shifter in the floor through 1948 in the pick up. I found a '48 truck transmission and took the gears out of my '40 box and installed them in this car which allowed me to have the shifter on the floor. Check out the details. The radiator is a special order from Walker. I called Travis Walker to get him to modify the '40 ford radiator. If you look closely you will see the filler cap assembly is from a '32' and it is mounted below the top of the radiator. This modification allowed the shell to fit smoothly across the top with no break for a filler cap.After discussing all these changes with Travis I asked him how much would it cost. His reply was "how does $850.00 sound. The shell is also one of a kind. It is from a '32 ford which was too high and too narrow so it had to be shortened and widened. The fiberglass work was done by Paul Wetsig of Wetsig Boat Mfg. Look at the pics closely. If you have any questions call me at show contact info
I am the builder.