Used 1987 monte carlo ss roller for sale in Woodbine, MD

 This is a 1987 Monte Carlo SS roller project car comes with rebuilt Saginaw trans hurst shifter G body shifter Mount, Drive shaft With new links, Grand national 8.510 bolt with 411 locker Eaton30 spline and drum backing plates with c clip eliminator‘s, also comes with Fully machined to 8360 over block with two sets of Pistons and rods one set stock one domed with Forged rods and one 10/10’d cast crank, was a line honed decked new bearings put in cam, arp main studs, new freeze plugs, straighted bores, reliefted for 2.02’s. Car comes with full interior minus front glass and headliner and carpet. Two sets of headers one with exhaust. Couple sets of fly wheels, two clutches one stock one 500 hp McLoyd clutch. The chassis is reinforced with plate steel in the c channels, has tubular suspension all the way around fully adjustable, limit chains were used in the rear in case of jumps. Body has been welded back together after having all the rust fixed and sprayed with por 15 and under coating, all body mounts on the frame and on the body have been welded reinforced and sprayed with Por 15, body has been cut for 12 point roll cage to mount to chassis, comes with two sets of wheels and tires all with over half tread, needs steering column positioned as well as driver seat for optimal driver position (stock sucks you’re always slamming your arms into the drivers door during turns). Sway bars are the thickest aftermarket so I could find, steering box is stock SS with aftermarket shaft. Fuel pump is a holly red carburetor pump the big one, stock tank, chassis has umi frame stiffeners, Front brakes are stock style but power stop brand Z 23 drilled and slotted, all body mounts are new, all brake lines are new, New calipers, New proportioning valve, New master cylinder old brake booster still functioning. I could go on and on but comes with many other parts. 5k obo want gone!