Used 1999 ram 2500 CTD custom for sale in Elmer City, WA
$12,000
Vehicle Details
1999 Year | 350,000 mi. Mileage | $12,000 Price |
truck Body Type | full-size Size | custom Exterior Color |
good General Condition | clean Title Status | 6 cylinders Cylinders |
manual Transmission | 4wd Drive Train | diesel Fuel Type |
Vehicle Description
1999 ram 2500
Long bed
Nv5600 conversion
South bend clutch- single
S&b intake system
4x4
Edge juice with attitude
75 over injectors
Pre emissions
5.9 Cummings
Long arm conversion
Fass lift pump
350,000 miles
Thuren fabrications long travel suspension with buggy rated bump
stops
Limiting straps on front axel
Full progressive rear leaf pack
Bed cage to stiffen rear end
Fox shocks tuned by thuren fabrications
Procomp wheels
I built this truck for the sand dunes, my wife and I love to ride together. I replaced the original auto transmission with a nv5600 and swapped the Dana 70 for a Dana 80 after breaking the ring and pinion. The truck has Fox shocks front and rear to control the long travel suspension. The suspension movement is controlled by 52 in long arms on heim joints.This truck has almost 2 feet of suspension travel in the front and rear. The front end is limited at 15 inch's with straps for driving it on the road as the suspension moves so much it changes the steering dynamics if left open. The rear end has a full progressive leaf pack from carli suspension. With a bed cage for stiffness in the rear ( this means the bed has been cut with 4 holes for access to the frame The tires need to be replaced as they are worn from daily driving.The motor is slightly modified with larger injectors billet turbo wheel 4inch exhaust and edge tuner. The turner is an Edge cts juice with attitude. Capable of producing 125hp and gobs of torque. it shows fuel pressure ,corrected mph, boost pressure, oil temp, gyro and many other features. This has been a fun truck but I'm trying to purchase a Wildlands fire engine for my company and the truck will need to go to store the engine for winter. I do not need to sell .but would make my life easier
This truck only needs tires.
I have all the original parts to go with the truck if you'd like to put it back the way it was.
Also for sale for additional cost a spare 5.9 Cummins motor. - from parts truck spun a barring. 700$
Muldoon's racing valve body for 47re -600$
Used 3 disk billet torque converter - 500 still in great shape
1997 ram 1500 4x4 work truck - 1500
Pictures upon request
Long bed
Nv5600 conversion
South bend clutch- single
S&b intake system
4x4
Edge juice with attitude
75 over injectors
Pre emissions
5.9 Cummings
Long arm conversion
Fass lift pump
350,000 miles
Thuren fabrications long travel suspension with buggy rated bump
stops
Limiting straps on front axel
Full progressive rear leaf pack
Bed cage to stiffen rear end
Fox shocks tuned by thuren fabrications
Procomp wheels
I built this truck for the sand dunes, my wife and I love to ride together. I replaced the original auto transmission with a nv5600 and swapped the Dana 70 for a Dana 80 after breaking the ring and pinion. The truck has Fox shocks front and rear to control the long travel suspension. The suspension movement is controlled by 52 in long arms on heim joints.This truck has almost 2 feet of suspension travel in the front and rear. The front end is limited at 15 inch's with straps for driving it on the road as the suspension moves so much it changes the steering dynamics if left open. The rear end has a full progressive leaf pack from carli suspension. With a bed cage for stiffness in the rear ( this means the bed has been cut with 4 holes for access to the frame The tires need to be replaced as they are worn from daily driving.The motor is slightly modified with larger injectors billet turbo wheel 4inch exhaust and edge tuner. The turner is an Edge cts juice with attitude. Capable of producing 125hp and gobs of torque. it shows fuel pressure ,corrected mph, boost pressure, oil temp, gyro and many other features. This has been a fun truck but I'm trying to purchase a Wildlands fire engine for my company and the truck will need to go to store the engine for winter. I do not need to sell .but would make my life easier
This truck only needs tires.
I have all the original parts to go with the truck if you'd like to put it back the way it was.
Also for sale for additional cost a spare 5.9 Cummins motor. - from parts truck spun a barring. 700$
Muldoon's racing valve body for 47re -600$
Used 3 disk billet torque converter - 500 still in great shape
1997 ram 1500 4x4 work truck - 1500
Pictures upon request