Used 2004 Ford Ranger 2wd Prerunner Supercharged - cars & trucks - by... for sale in Lake Toxaway, NC
$8,850
Vehicle Details
2004 Year | 76,500 mi. Mileage | $8,850 Price |
pickup Body Type | white Exterior Color | excellent General Condition |
clean Title Status | 6 cylinders Cylinders | automatic Transmission |
rwd Drive Train | gas Fuel Type |
Vehicle Description
76k original miles
4.0L V6
2wd
Ton of stuff done, little more to do. Driveable as is, daily. 16mpg. Requires Methanol for full throttle use!!
Front end:
- Camburg Engineering 5.5 Performance lift
- Camburg 2.0 upgrade with Gussets
- Fox Factory Race remote reservoir shocks
- Camburg Heim steering kit
- Mcneil Racing 3" front fenders (unpainted)
Engine:
- 4.0L
- Eaton m90 supercharger with 4 pulleys (3.5psi, 5.5psi, 8psi, and 9.5psi)
- Dynoed with the 3.5psi pulley at 217rwhp 256 torque with 33 inch tires and 3.55 gearing
- single stage Devil's Own methanol delivery kit (for engine protection with 5.5psi and 9.5psi pulleys)
- Transmission was rebuilt and updated with heavier duty parts, shift kit, 4wd filter and pan, etc BEFORE the motor work was done. Zero issues.
Rear (current):
- Yukon gear and Axle 4.10 gears
- Eaton Detroit TrueTrac limited slip
- Deaver F31 Leaf springs
- Bilstein 5100s
- Camburg extended shackles
- KarTek drop hangers
Inside:
- VDO Boost gauge
- AEM AFR gauge
New front wheels bearings, rotors, pads.
Less than 15k miles on the build. If you're interested I can tell you more.
If the ad is here, it's still for sale.
4.0L V6
2wd
Ton of stuff done, little more to do. Driveable as is, daily. 16mpg. Requires Methanol for full throttle use!!
Front end:
- Camburg Engineering 5.5 Performance lift
- Camburg 2.0 upgrade with Gussets
- Fox Factory Race remote reservoir shocks
- Camburg Heim steering kit
- Mcneil Racing 3" front fenders (unpainted)
Engine:
- 4.0L
- Eaton m90 supercharger with 4 pulleys (3.5psi, 5.5psi, 8psi, and 9.5psi)
- Dynoed with the 3.5psi pulley at 217rwhp 256 torque with 33 inch tires and 3.55 gearing
- single stage Devil's Own methanol delivery kit (for engine protection with 5.5psi and 9.5psi pulleys)
- Transmission was rebuilt and updated with heavier duty parts, shift kit, 4wd filter and pan, etc BEFORE the motor work was done. Zero issues.
Rear (current):
- Yukon gear and Axle 4.10 gears
- Eaton Detroit TrueTrac limited slip
- Deaver F31 Leaf springs
- Bilstein 5100s
- Camburg extended shackles
- KarTek drop hangers
Inside:
- VDO Boost gauge
- AEM AFR gauge
New front wheels bearings, rotors, pads.
Less than 15k miles on the build. If you're interested I can tell you more.
If the ad is here, it's still for sale.