Used 1989 Land Rover Defender for sale in Dallas, TX
Vehicle Details
1989 Year | 0 mi. Mileage | $70,000 Price |
1551400 Manufacturer Product Number | Land Rover Make | Land Rover Model |
Dallas, Texas Location | Corris Grey Exterior Color | Excellent Exterior Condition |
Fully Restored Restoration History | V-8 Engine Size | Rebuilt Engine History |
Manual Transmission | Anthracite Interior Color | Leather Seat Material |
Seller
- Dallas, Texas
- 2028136528
Vehicle Description
Make: Land Rover
Model: Defender 110
Year: 1989
Vin No: 373507
Engine: 3.5 V8
Body Color: Corris Grey
Interior Color: Anthracite
1. Engine
• Major Service was done to the Engine with the follow additional Parts Replaced:
• Fan Belts
• Pulleys
• Water Pump
• Water Pump Pulley
• Alternator
• Rebuild Carburetor
• Engine Mountings
• Viscous Fan
• Starter Motor
• Distributor Cap
• Plug Leads
• Spark Plugs
• Exhaust Gaskets
• Front Cover Seal
• Tappet Cover Gasket
2. Gearbox
• Gearbox was Serviced and a Visual inspection was done. 3. TransferCase
• Transfer Case was serviced, and a visual inspection was done.
4. FrontandRearAxle
• Axles was Serviced and a visual inspection was done, we also replaced the below listed parts:
• Swivel Ball Seals
• Swivel Ball Kits
• Drive Members
• Hub Seals
• Wheel Bearings stripped and Repacked.
5. Cooling System
All Components of the Cooling System gets a Visual inspection done to make sure it is all still up to standard, with some parts replaced as listed below:
• Thermostat
• Water Hoses
• Heater Hoses
• Viscous Fan
• Water Pump
• Water Pump Pulley
6. Brake System
All Components of the Braking System was serviced and Checked with the following Replaced.
• Brake Master
• Brake Equalizer Valve
• Steel Pipes
• Flex Pipes
• Brake Calipers
• Brake Disc
7. Clutch System
All Components of the Clutch System was serviced and Checked with the following parts replaced.
• Clutch Master
• Clutch Slave
• Clutch Plate
• Pressure Plate
• Release Bearing
• Clutch Fork
• Steel Pipe
8. Fuel System
All Components of the Fuel System have been checked with the following replaced.
• Fuel Pump
• Fuel Lines
9. Suspension
All Suspension parts get replace with new OEM Parts.
• Bushes
• Rubbers
• Shocks
• Coils
• Steering Damper
Interior Work done on Each Build.
• Interiors get completely stripped out to bare metal.
• Each Seats gets stripped down and sand blasted.
• The Seat Frames gets inspected to make sure it is in perfect condition.
• Frame gets send for Powder Coating and gets a double coat done.
• Seat Sponge get repaired/replaced.
• Seats, Door Panels, Centre Console, Dash Top and Dash Bottom gets Covered in Leather.
• Sound Proofing gets done throughout the Vehicle.
• New Carpers get fitted in Vehicles.
• Roof Lining Get Replaced
Body Work on Each Build.
• Vehicle get stripped for paint Work.
• Body parts get send to the Body shop, were clean each panel to the bare metal, each body panel goes
through a quality inspection before it gets send to the Prep Bay.
• Each Panel Gets prep and Sprayed to ensure the best quality paint work.
• All paint work gets done in a Down Draft Spray booth.
• After the Paint shop, the Parts gets send to the Assemble Bay were the Vehicle get hand assemble to the
highest standard to ensure the body parts are line up to a perfect standard.