Used JDM 1992 Mazda RX-7 FD FD3S with a Brand New Engine! for sale in Phoenix, AZ
$29,500
Vehicle Details
| 1992 Year | 47,000 mi. Mileage | $29,500 Price |
| black Exterior Color | like new General Condition | clean Title Status |
| manual Transmission | rwd Drive Train | gas Fuel Type |
Vehicle Description
Origin: Japan
Year: 1992
Make: Mazda
Model: RX-7
Engine: 1.3L 13B-REW Rotary
Chassis Mileage: 76,210 km (47,354 miles)
Engine Mileage: 70 km (44 miles)
Transmission: 5-Speed Manual
Drivetrain: Rear Wheel Drive
Drive side: Right Hand Drive
Title: Clean and Transferable Montana Title
This 1992 Mazda RX-7 is a one of a kind FD3s with true Japanese tuning aesthetic. We installed a brand new OEM engine in-house, and followed that up with a custom tuned map on our dyno to accommodate US fuel. This RX-7 puts down 316hp to the wheels at 13psi on 91 Octane pump gas.
The black exterior of this RX-7 is smooth and glossy with minimal imperfections. The vented carbon fiber hood made by Odula is a rare JDM item and does a great job of reducing under hood temperatures. The RE Style front aero bumper does a great job directing airflow to the newly installed dual-pass Koyo radiator and dual oil coolers. A very nice factory replacement intercooler made by legendary rotary tuners RE-Amemiya, tops off the cooling improvements. This RX-7 runs cool with stable coolant, oil, and EGT temperatures. Overheating is not a concern when driving this rotary powered car.
The interior has classic Japanese styling, with bright Apex’i and Blitz gauges displaying engine vitals, and a classic Momo Corse steering wheel to top it off. The interior is in very good condition, with minimal wear on the seats and great condition interior panels. Unlike USDM variants, this FD3s features rear seats. The rear seats are hidden behind a 6-point roll bar that ties into the rear strut towers to increase chassis stiffness and roll protection.
The adjustable Zeal coilover suspension gives a nice ride on the street, and the factory brakes do a great job of slowing down the car. The Apex’i catback exhaust provides a nice exhaust tone with minimal cabin noise. That is until the external wastegate opens up and really brings the car to life. This RX-7 is very fun to drive, and has a very responsive HKS floating disk clutch that takes a skilled operator to manage. Gear changes are smooth and grind free, and the car accelerates effortlessly without hiccups or flat spots.
Highlights:
Brand New Factory Mazda 13B-REW engine
Apex’i RX6 single turbo kit
RE-Amemiya Intercooler
Dual-Pass Koyo Radiator
Apex’i Power FC ECU
New 550cc primary injectors
Upgraded 1300cc secondary injectors
Apex’i Catback Exhaust
HKS Single plate clutch
Desmond Regamaster 17x8, 17x9 wheels
6-point Roll Bar
Momo Steering wheel
Zeal Coilovers
Rare Odula Carbon Fiber vented hood
Veilside Carbon Kevlar spoiler
RE style aero front bumper
Blitz digital boost gauge
Apex’i Digital Oil temp + EGT gauge
Greddy Profec Analog boost controller
Japanese Kenwood radio
OE Mazda parts replaced during assembly:
New Throttle Body gaskets
New Upper and Lower Intake manifold gaskets
New Exhaust Manifold gaskets
New OMP feed lines
New OMP seal and crush washers
New OMP oil squirters and crush washers
New Oil level sensor seal
New Thermostat housing gasket
New Thermostat
New Drive belts
New Power Steering pulley
New Oil filer housing seals
New fuel injector seals
New fuel lines
New fuel filter
We have receipts on hand for the OE Mazda replacement parts and brand new engine.
The following components were upgraded to enhance the performance and reliability of the engine:
Vacuum rats nest eliminated.
New high grade silicon vacuum lines used to simplify vacuum system.
Steel block off plates fixed to the intake manifold to allow for simplified single turbo operation.
Add-on idler pulley installed to allow for proper belt contact with water pump pulley.
Secondary throttle body butterflies removed to increase response and optimize single turbo system.
New heat-shielding applied around coolant lines, fuel lines, and vacuum lines in heat sensitive areas.
Aluminum Koyo dual-pass radiator installed to manage coolant temperatures more effectively.
If you have any questions about this RX-7 please reach out to us, we’d love to discuss the details of this vehicle with you.
This vehicle is located in Oakland, CA. Nationwide shipping available!
Video here:
We can be reached at 510-532-2536
Year: 1992
Make: Mazda
Model: RX-7
Engine: 1.3L 13B-REW Rotary
Chassis Mileage: 76,210 km (47,354 miles)
Engine Mileage: 70 km (44 miles)
Transmission: 5-Speed Manual
Drivetrain: Rear Wheel Drive
Drive side: Right Hand Drive
Title: Clean and Transferable Montana Title
This 1992 Mazda RX-7 is a one of a kind FD3s with true Japanese tuning aesthetic. We installed a brand new OEM engine in-house, and followed that up with a custom tuned map on our dyno to accommodate US fuel. This RX-7 puts down 316hp to the wheels at 13psi on 91 Octane pump gas.
The black exterior of this RX-7 is smooth and glossy with minimal imperfections. The vented carbon fiber hood made by Odula is a rare JDM item and does a great job of reducing under hood temperatures. The RE Style front aero bumper does a great job directing airflow to the newly installed dual-pass Koyo radiator and dual oil coolers. A very nice factory replacement intercooler made by legendary rotary tuners RE-Amemiya, tops off the cooling improvements. This RX-7 runs cool with stable coolant, oil, and EGT temperatures. Overheating is not a concern when driving this rotary powered car.
The interior has classic Japanese styling, with bright Apex’i and Blitz gauges displaying engine vitals, and a classic Momo Corse steering wheel to top it off. The interior is in very good condition, with minimal wear on the seats and great condition interior panels. Unlike USDM variants, this FD3s features rear seats. The rear seats are hidden behind a 6-point roll bar that ties into the rear strut towers to increase chassis stiffness and roll protection.
The adjustable Zeal coilover suspension gives a nice ride on the street, and the factory brakes do a great job of slowing down the car. The Apex’i catback exhaust provides a nice exhaust tone with minimal cabin noise. That is until the external wastegate opens up and really brings the car to life. This RX-7 is very fun to drive, and has a very responsive HKS floating disk clutch that takes a skilled operator to manage. Gear changes are smooth and grind free, and the car accelerates effortlessly without hiccups or flat spots.
Highlights:
Brand New Factory Mazda 13B-REW engine
Apex’i RX6 single turbo kit
RE-Amemiya Intercooler
Dual-Pass Koyo Radiator
Apex’i Power FC ECU
New 550cc primary injectors
Upgraded 1300cc secondary injectors
Apex’i Catback Exhaust
HKS Single plate clutch
Desmond Regamaster 17x8, 17x9 wheels
6-point Roll Bar
Momo Steering wheel
Zeal Coilovers
Rare Odula Carbon Fiber vented hood
Veilside Carbon Kevlar spoiler
RE style aero front bumper
Blitz digital boost gauge
Apex’i Digital Oil temp + EGT gauge
Greddy Profec Analog boost controller
Japanese Kenwood radio
OE Mazda parts replaced during assembly:
New Throttle Body gaskets
New Upper and Lower Intake manifold gaskets
New Exhaust Manifold gaskets
New OMP feed lines
New OMP seal and crush washers
New OMP oil squirters and crush washers
New Oil level sensor seal
New Thermostat housing gasket
New Thermostat
New Drive belts
New Power Steering pulley
New Oil filer housing seals
New fuel injector seals
New fuel lines
New fuel filter
We have receipts on hand for the OE Mazda replacement parts and brand new engine.
The following components were upgraded to enhance the performance and reliability of the engine:
Vacuum rats nest eliminated.
New high grade silicon vacuum lines used to simplify vacuum system.
Steel block off plates fixed to the intake manifold to allow for simplified single turbo operation.
Add-on idler pulley installed to allow for proper belt contact with water pump pulley.
Secondary throttle body butterflies removed to increase response and optimize single turbo system.
New heat-shielding applied around coolant lines, fuel lines, and vacuum lines in heat sensitive areas.
Aluminum Koyo dual-pass radiator installed to manage coolant temperatures more effectively.
If you have any questions about this RX-7 please reach out to us, we’d love to discuss the details of this vehicle with you.
This vehicle is located in Oakland, CA. Nationwide shipping available!
Video here:
We can be reached at 510-532-2536
Popular cars
22
1979 Mazda RX-7 in Connellsville, PA
$8,900
1979 Mazda RX7 all original. This is a true timepiece. Original paint and interior. Runs and drives great. Has normal wear and tear. Hurry and call today 412-480-0882. Won't last at this price.
4
Mazda RX-7 turbo II in Ingalls, IN
$5,500
Looking to sell my 87 turbo II. Cosmetically not the best however most everything else has been replaced. Was intended to be my fun car however I am moving on to other things. The Bad Car will start but not run as it needs tuned...
6
1980 Mazda RX-7 in Cadillac, MI
$11,495
1980 Mazda RX 7. Rotary motor. 4 speed manual. Good condition. Mostly garage kept. 89K miles. Runs good. Everything works. Many new parts. MOSTLY GARAGE KEPT, VERY LITTLE RUST Please Note The Following *Vehicle Location is at our clients home and ...
22
1979 Mazda RX-7 in Connellsville, PA
$8,900
1979 Mazda RX7 all original. This is a true timepiece. Original paint and interior. Runs and drives great. Has normal wear and tear. Hurry and call today 412-480-0882. Won't last at this price.
4
Mazda RX-7 turbo II in Ingalls, IN
$5,500
Looking to sell my 87 turbo II. Cosmetically not the best however most everything else has been replaced. Was intended to be my fun car however I am moving on to other things. The Bad Car will start but not run as it needs tuned...
6
1980 Mazda RX-7 in Cadillac, MI
$11,495
1980 Mazda RX 7. Rotary motor. 4 speed manual. Good condition. Mostly garage kept. 89K miles. Runs good. Everything works. Many new parts. MOSTLY GARAGE KEPT, VERY LITTLE RUST Please Note The Following *Vehicle Location is at our clients home and ...
Similar cars
23
JDM 1992 Mazda RX-7 FD3S with a BRAND NEW ENGINE! in Lake Oswego, OR
$29,500
Origin: Japan Year: 1992 Make: Mazda Model: RX-7 Engine: 1.3L 13B-REW Rotary Chassis Mileage: 76,210 km (47,354 miles) Engine Mileage: 70 km (44 miles) Transmission: 5-Speed Manual Drivetrain: Rear Wheel Drive D...
13
1985 Mazda RX-7 GSL-SE in Orland Park, CA
$20,000
1985 Mazda RX-7 GSL-SE 30,000 miles one owner garage kept Chicago suburb
15
JDM RHD 1992 Mazda RX7 FD japandirectmotors.com in Columbia, GA
$19,950
JAPANDIRECTMOTORS.COM JDM RHD 1992 Mazda RX7 FD showing only 58,000 miles. The car is Extremely nice! This is only one of over 50 vehicles in stock. We are located in Irmo S.C. and are open Monday - Sunday 9am-9pm by appointment. please visit our ...
1
Recently viewed
29
1981 Mazda RX-7 in Richland, WA
$19,500
All Original - Near Show Room Condition Rotary Engine - 5 Speed Manual Transmission One Owner (documented) Original Manuals ,etc. Less than 5400 original Miles Radio and AC Always Garaged Custom Sheep Skin Seat Covers Front end BRA Color: Stardust...
8
For Sale at Auction: 1988 Mazda RX-7 in Wayne, WV
This Mazda RX-7 was sold new by a West Virginia in 1988 and purchased in November of the same year by its second owner, with whom it remained until being acquired by the seller inspring 2019. The car is finished in Sunrise Red over Off-Black leath...
10
1985 Mazda RX-7 in Catharpin, VA
$11,998
I am the 2nd owner of this great car, having purchased it from my neighbor and original owner back in June 1998. I have made many modifications to the car to improve handling, acceleration, reliability, esthetics, etc. The addition of the MSD 6 ig...
93
1987 Mazda RX-7 in Kentwood, MI
$28,900
The second generation Mazda RX7 dubbed the FC was first introduced in 1985 and featured the still revolutionary 1.3L rotary engine. Designed by Felix Wankel, the rotary engine has the advantages of a compact design and low weight. It doesn't use c...